In the heavy equipment market, there is no great solution to jump starting large trucks and industrial machinery.
In most cases, workshops have trolleys with large batteries – and often they have not been recharged so just when you need them most, they have a flat battery. Those requiring portable jump starting are often carting around ute trays or small trucks filled with batteries to start the equipment.
Now you can say goodbye to those headaches – with Projecta’s Intelli-Start industrial jump starter IS5000HD. It’s the latest instalment of the world’s best jump starters by Projecta – designed for unrivalled versatility.
Since the market changing launch of the IS3000 and IS5000 jump starters, the team at Projecta has added even more functionality to the industrial jump starter range with this latest release.
Jump start just about anything
The IS5000HD has been designed to start just about any machinery, will never be flat (due to RRT), is ultra safe, workshop tough and light enough for just about anyone to carry with just one arm.
World’s most advanced jump starters
The Intelli-Start industrial jump starter IS5000HD offers unlimited jump starting due to its patented Rapid Recharge Technology (RRT).
It’s been tested and proven to start just about anything with up to 1500A of clamp power (12V); and is supplied with detachable clamps with a multi-pole heavy duty connector. This ensures all safety protocols remain active, even when interchanging cables.
As this jump starter is lightweight and portable, it’s a truly mobile solution that won’t break your back. The IS5000HD is designed to be the safest jump starter on the market – an advanced all-in-one protection system preventing surges, short-circuits and overheating; offering 12/24 volt operation with automatic voltage detect.
Adding to its range of benefits, it’s easy to use too, featuring – intuitive an colour screen that indicates alarms, battery status and vehicle status.
Multi-pole heavy duty connector
While the standard IS5000 offers enough starting capacity to start just about any industrial equipment, some machines and heavy transport vehicles have specific jump-starting points that may be impossible to reach with standard clamps.
To overcome this, the IS5000HD incorporates a multi-pole heavy duty connector which allows the heavy-duty clamps to be disconnected from the jump starter leads. This allows the user to switch between clamps, 350A heavy duty connector or CAT connector depending on the vehicle/equipment they are starting (adapters sold separately).
The multi-pole connector is especially important for applications requiring clamps, as it allows the sensing wires to remain intact so the jump starter can work just like the standard IS5000 with all protections and sensors functioning correctly (e.g. reverse polarity or voltage sensing).
For applications requiring the 350A HD connector (e.g. transport fleets) or CAT plug (e.g. industrial equipment), additional adapter leads are available. Each are 1.3 metres long. This was done to allow the unit to sit on the ground and start just about any piece of equipment (total cable length from unit to end of HD or CAT plug is 2.8 metres).
For users who need all three connectors, the ISHDKIT is available. This all-in-one unit contains both the 350A HD and CAT plug adapters in a durable carry bag, which can also accommodate the clamps.
With all these additions the jump starter itself has been proven to provide just as much power at the ‘clamps’, meaning it will start just about any engine.
Projecta’s Intelli-Start industrial jump starter IS5000HD also comes with a market leading two-year warranty.
For more information, please visit the website at intelli-start.com.
[signup]
The post Projecta’s Intelli-Start offers the perfect jump starting solution appeared first on Big Rigs.